2007-2009 Hyundai Santa Fe 3.3L left LH exhaust manifold with catalytic converter
2007-2009 Hyundai Santa Fe 3.3L left LH exhaust manifold with catalytic converter - Image 2
2007-2009 Hyundai Santa Fe 3.3L left LH exhaust manifold with catalytic converter - Image 3
2007-2009 Hyundai Santa Fe 3.3L left LH exhaust manifold with catalytic converter - Image 4
2007-2009 Hyundai Santa Fe 3.3L left LH exhaust manifold with catalytic converter - Image 5

2007-2009 Hyundai Santa Fe 3.3L left LH exhaust manifold with catalytic converter

$250.00

Original equipment manufacturer (OEM) used part

2007-2009 Hyundai Santa Fe 3.3L V6 — left hand (LH) bank exhaust manifold

This is the manifold with the catalytic converter cast into it, not a bare manifold

Both oxygen sensors are still fitted — see photos

Condition: used, surface rust as expected — see photos

Price includes shipping. Ships from Illinois.

1 in stock

SKU: 0700 Categories: , Brand:

Description

About this part

Genuine Hyundai OEM exhaust manifold for the 2007-2009 Santa Fe with the 3.3L V6, left hand bank. On this engine the manifold and the catalytic converter are one casting — the converter body hangs directly off the runners, as you can see in the photos. Hyundai lists this style of part as a manifold catalytic assembly.

Fits

  • 2007, 2008 and 2009 Hyundai Santa Fe with the 3.3L V6
  • Left hand (LH) bank

Does not fit

  • The right hand bank — that side is Hyundai 28510-3C680 and is a different casting
  • Santa Fe with the 2.7L or 2.4L engine
  • 2010 and newer Santa Fe

Check this before you order

  • Confirm your engine is the 3.3L V6.
  • Confirm you need the left hand bank. The right hand part is 28510-3C680, so if that is the number you are chasing, this is the wrong side.
  • Compare the runner angles and the flange in the photos to the manifold on your car. Ask if you want a close up of anything.
  • No casting number is legible on this unit. If you need a number confirmed before you buy, send a message and it can be checked.

Condition

Used OEM part pulled from a vehicle. It carries the surface rust any exhaust part has after years on the road. The flanges, the studs and the sensor bungs are shown in the photos — look through all of them before you buy.

What is included

One (1) left hand exhaust manifold with integrated converter as pictured, with the two oxygen sensors that are visible in the photos. Gaskets, heat shields, studs, nuts and downpipe hardware are not included unless you can see them in the photos.

Why used OEM

A factory Hyundai manifold bolts to the head and the downpipe exactly as it should, with the sensor bungs in the right place and the right thread. Aftermarket manifolds for this engine often need the flange persuading and can put the sensors at the wrong angle.

Shipping

Ships from Illinois. Shipping is included in the price. The manifold is boxed with the flange faces protected.

REFUND AND RETURN POLICY

Related products